The ParaFuel™ NIR Process analyzer from LT Industries provides comprehensive inline analysis of Diesel, Gasoline, Jet Fuel, Kerosene, Crude Oil, Blending components and Blended Fuels for a wide range of critical properties including Octane, Distillation Points or RVP. The analyzer is also available in a benchtop version designed to improve efficiency when testing in laboratories.

Validate Fuel and Crude Oil Quality

With the ParaFuel™ analyzer, accurate measurement of the properties of petrochemical products and crude oils  is easy. Whatever the analytical need – inspection of crude oil or finished products, inline property measurements, or validating shipments – the ParaFuel™ can do the job. The optical analysis technique allows for easy integration and rapid inline measurement. ParaFuel™ Process Systems measures key chemical and physical properties rapidly and accurately directly in process, to monitor changing process conditions in real time and to adjust as necessary. The simple test procedure allows for greater experimental repeatability — and it does not require special operator skills. Inline Testing of up to 20 measuring points With the capability to measure 20 points with a single analyzer, you can validate quality and performance at all stages — from crude samples at the well to downstream refining.  Improve your process knowledge and control.

Measure in process or in the laboratory

The ParaFuel™ Process Analyzer comes complete with probes and flow cells built to suit your measurement needs. They are available in a variety of lengths, configurations and materials depending on your measurement requirements. High pressure and temperature sampling probes can withstand the conditions associated with oil production and refining. Instruments are designed for direct integration into existing control systems via the LTBus automation & communication software. The ParaFuel™ Analyzer can communicate directly via standard protocols such as Modbus and 4-20mA. The ParaFuel™ Benchtop System provides the same high quality measurements as the process system.

Key Features

  • Designed for 24/7 operation
  • Measure up to 20 process points with one analyzer
  • Probes and flow cells for continuous processes
  • Easy integration into existing DCS
  • Fully automated user interface
  • Remote diagnostic capability
  • Remote update capability
  • Enclosures for protection against dust, water and environment


Automated, nondestructive inline analysis, completed within seconds. Results sent to your DCS, PLC, or LIMS.

  • Control  the  use  of  high-value  crudes  and  chemicals — Measure concentrations and use only what you need
  • Validate quality throughout the process —  Determine where and when product falls out of specification
  • Make process adjustments in real time —  Reduce waste by adjusting processes rather than discarding batches
  • Reduce energy consumption and increase process efficiency — Accurately determine concentrations and reaction progress
  • Design quality into your process —  Achieve higher standards than are possible with batch testing alone


  • ParaFuel™ analyzers are utilizing LT Industries´ knowledge of over 30 years experience in developing NIR analyzers
  • Fast inline or laboratory measurement
  • Real time monitoring of multiple process streams
  • Automated results on a simple interface
  • Validation of incoming product
  • Improved product quality
  • Improved repeatability
  • Reduced expenses
  • Minimal operator training
  • Rapid return on investment

Models Available:

  • ParaFuel™ NIR Process Analyzer Single System Includes one (1) High Energy Bubble Shedding Probe
  • ParaFuel™ NIR Process Analyzer Multi-System Includes Multiplexer and Up to twenty (20) Probes
  • ParaFuel™ NIR Benchtop Analyzer Includes one (1) Dip Probe

Fuel Properties (Gas, Diesel, Jet) Common Measurements
RON Vapor Pressure
MON Pour Point
Cetane Viscosity
Density / API Methanol
Flash Point Olefins
Cloud Point Hydrogen
CFPP Wax Content
Smoke Point Aniline Point
Specific Gravity Freeze Point
Aromatics, v% Cloud Point
Olefins, v% Distillation Points
MTBE, v% n-Paraffins
Saturates, v% C/H Ratio
Benzene, v% Water Content
Ethanol Yields
Distillation SARA
Evaporation Total Aromatics
Color API Gravity / Density
Pump Quality Emulsion Stability
Acidity / TAN
Petrochemical Properties Solids
p/o/m-Xylenes Asphalt
Paraffins TBP
Isoparaffins Asphaltene Content
Napthenes Asphaltene Deposition
Oxygenates Asphaltene Precipitation
Aromatics Sulfur
Acids in Alkylation
High/Low RON
Technical Data ALL Analyzers
Power Supply 100-240 VAC, 50/60 Hz
Scan time 30 seconds (user adjustable)
Computer Interface Standard Windows PC with LT Software Package
A-C Communication Standard TCP/IP Ethernet
Technical Data PROCESS Analyzer
Classification C1D2 Standard, C1D1 Optional
Control System Communication Modus RTU Standard (Option: Modbus TCP, 4-20 mA)
Number of measurement points Up to 20
Sample Up to 150 C and up to 7000 kPa (1000 psi)
Fiber Optic Cable Length 3 m standard, up to 200 m
Sample Temperature Measurement Automatic, built-in measurement
Technical Data BENCHTOP Analyzer
Dimensions 12″ x 15″ x 13″ (30.5 cm x 39.7 cm x 34.9 cm)
Data Storage Data automatically logged and stored Standard TCP/IP connection for integration into Lab Network and existing LIMS
ASTM D86, D323, D445, D613, D2699, D2699, D2700, D5191, D6378
Ürün Broşürü:
Parafuel Datasheet.pdf

Your Name

Organization Name
Firma/Kurum Adı

Phone Number

E-Mail Address
E-Posta Adresiniz

Product Name
Ürün Adı

Your Message